Mitsubishi Ethernet驱动 - Kepware OPC Server 中国区总代理、合作伙伴

Mitsubishi Ethernet

产品概览

下载试用

Mitsubishi Ethernet 设备驱动与 KEPServerEX 协同工作，在 OPC 客户端和 Mitsubishi A 与 Q 系列 PLC（通过 AJ71E71 或 QJ71E71 系列通信卡连接）之间提供数据交换。KEPServerEX 基于客户端需求自动优化您的数据采集过程。我们强大的错误处理能力可确保数据完整性。

搜索 KEPServerEX 产品

支持与维护

联系销售人员

询价或售前咨询

电话：4006 139 938 / 021-5102 8348
电子邮件：

资源

性能
协议
支持的设备
可用语言
应用程序支持
发行说明
相关硬件产品
特色套件

性能

支持设备自动降级。
为网络桥接提供 PC 号支持
使用 AJ71E71 系列通信卡
支持的内存类型：CC、X、Y、M、B、L、F、TS、TC、TN、CS、CT、CN、D、W、R
支持 Q 特定内存类型：DX、DY、SB、SM、V、SS、SC、SN、SD、SW、Z
支持所有数据类型

协议

MELSEC

支持的设备

All A Series and Q (Q mode) Series PLCs
FX3U
Mitsubishi iQ-F Series CPUs
Mitsubishi iQ-R Series CPUs
Mitsubishi L Series
Mitsubishi QnA Series

可用语言

Simplified Chinese
日语
英语

应用程序支持

DDE Format CF_Text and AdvancedDDE
NIO Interface for iFIX
OPC .NET Service (OPC .NET) Version 1.00
OPC Alarms and Events (OPC AE) Version 1.10
OPC Data Access (OPC DA) Versions 1.0a, 2.0, 2.05a, and 3.0
OPC Unified Architecture (OPC UA) Version 1.02
SuiteLink and FastDDE for Wonderware

发行说明

6.2.460.0

2017/7/6

增加了中文支持。

6.2

2017/6/8

Added the ability to interface with Mitsubishi iQ-R series CPUs through the CPU’s built-in Ethernet Port or through the RJ71EN71 Ethernet module.
Added the ability to interface with Mitsubishi iQ-F series CPUs through the CPU’s built-in Ethernet Port.
Enhanced support for limited bandwidth scenarios by reducing the minimum Word Block Size from 16 to 1 for the Q, QnA, and L series controllers.
Fixed an issue that introduced in version 6.1 that prevented arrays larger than the maximum block size from being accessed for the A, FX3U, and Q series controllers. Users of the Q Series must edit the server project to adjust the block size to be equal to or larger than the array size.
Fixed an issue in the Q, QnA, and L series models where writes were not allowed for arrays larger than 256.

Note: Support for reading arrays larger than 256 was added in V6.1.

6.1.601.0

2017/4/4

Added support for Random Writes on some models so multiple writes can be sent in a single request significantly increasing the write performance.
Added support for QnA and L Series Models.
Added the ability for users to specify read/write block sizes. Larger block sizes can greatly increase read performance.

6.0.2107.0

2016/11/15

Added support for Chinese, Japanese, and Korean (CJK) characters.
Added support for redundant and multiple CPU configurations to the Q-Series model.
Added Japanese language support.

5.21.114.0

2017/3/20

Added support for Chinese, Japanese and Korean (CJK) characters.
Added support for redundant and multiple CPU configurations to the Q-Series device model.

5.14.491.0

2014/2/18

The Mitsubishi Ethernet Driver now handles the closing of a connection correctly whether it was initiated by the server or by the device.

Fixed an issue with the A Series model where Boolean Special Int. Relays were bit shifted in memory.

5.10.205

2012/11/13

Fixed the address validation failures that resulted from leading zeroes.

5.8.109.0

2012/2/21

Corrected issues that prevented the Synchronization Method from persisting. Fixed an issue where the Time and Date Synchronization dialog was not being updated correctly after the model was changed but had not been applied.

5.6.122.0

2011/7/25

Increased the address ranges allowed for B, CC, CN, CS, F, L, M, SB, SW, TC, TN, TS, V, and Z memory types.

5.4.131.0

2010/10/28

Resolved issue for native Boolean address types where driver returned "Bad Address" instead of "Bad Type" on first attempt at adding dynamic tag of data type Double.
Fixed an issue wherein the parser did not accept addresses for X, Y, W, and ZR if the hex component immediately followed the memory type.

5.3.118.0

2010/6/9

Added Support for "L" suffix to CN type.
Fixed issue where address parser allowed Date data types for bit addresses.
No longer deactivate tags for out of range errors.
Enhanced event log messages for read and write errors.
Added support for ZR file registers to the Q Series model.

5.1.71.0

2009/10/21

Added support for Double and Date data types to A Series and FX3U models.
Added support for Extended Data Registers to Q series models.
Added support for Extended Link Registers to Q series models.
Added support for Double and Date data types to Q series models.

特色套件

什么是驱动？

KEPServerEX 不仅是 OPC 服务器，它还是一种适用于工业自动化和 IoT 的连接平台。只需下载 KEPServerEX，然后从包含 150 多种设备驱动、客户端驱动和高级插件的 Kepware 库中选择，以便适合您工业控制系统的独特通信要求。

驱动是一种软件组件，能够使 KEPServerEX 满足某个特定设备、系统或其他数据源的连接要求。此驱动处理 KEPServerEX 与数据源进行的所有专属通信；客户端接口处理通向监控或控制设备的应用程序的所有连接，包括支持的 OPC 连接、专属连接和开放式标准连接。

驱动可以单独或以套件形式获得授权许可。随着连接需求的发展，可以按需对其他驱动进行许可。