Omron FINS Ethernet驱动 - Kepware OPC Server 中国区总代理、合作伙伴

Omron FINS Ethernet

产品概览

下载试用

Omron FINS Ethernet 驱动与 KEPServerEX 协同工作，通过 UDP/IP 在 OPC 客户端和使用 Omron FINS 协议的 PLC 之间交换数据。它还支持 Sysmac Link 操作，以通过 Sysmac Net 访问其他 PLC。KEPServerEX 可根据客户端的需求自动优化数据采集，并通过强大的错误处理能力确保数据完整性。

搜索 KEPServerEX 产品

支持与维护

联系销售人员

询价或售前咨询

电话：4006 139 938 / 021-5102 8348
电子邮件：

资源

性能
协议
支持的设备
可用语言
应用程序支持
发行说明
更多技术信息
相关硬件产品
特色套件

性能

支持 UDP/IP 通信
支持 FINS 网关以允许 Sysmac Link 和 Sysmac Net 访问
支持辅助继电器

协议

Omron FINS over Ethernet

支持的设备

Devices Supporting FINS protocol via Sysmac Way: Host Link Interface

可用语言

Simplified Chinese
日语
英语

应用程序支持

DDE Format CF_Text and AdvancedDDE
NIO Interface for iFIX
OPC .NET Service (OPC .NET) Version 1.00
OPC Alarms and Events (OPC AE) Version 1.10
OPC Data Access (OPC DA) Versions 1.0a, 2.0, 2.05a, and 3.0
OPC Unified Architecture (OPC UA) Version 1.02
SuiteLink and FastDDE for Wonderware

发行说明

6.2.460.0

2017/7/6

增加了中文支持。

6.0.2107.0

2016/11/15

Added support for Chinese, Japanese, and Korean (CJK) characters.
Added Japanese language support.

5.18.662.0

2015/6/23

Enhanced error detection to support remote network errors to place the device in error state. This more accurate reporting supports redundancy failover.

5.17.495.0

2015/2/24

Corrected an issue where the driver would produce a syntax error during tag validation if the data type was not supported. Some clients add items with a set data type regardless of the address. The driver now responds with bad type, allowing the driver library to validate again with the default type.

5.15.585.0

2014/7/22

Increased the maximum channel limit to 512.

5.6.122.0

2011/7/25

Added the ability to select the behavior when writes are issued to TS and CS addresses (when the PLC is in Run Mode). Before, these writes would fail and an error would be logged. Options also exist to set the PLC to Monitor Mode and to perform the write, or to set the PLC to Monitor Mode, perform the write, and then reset the PLC to Run Mode.

5.4.131.0

2010/10/28

Added support for the CJ2 Model.
Added the reporting of device-level error conditions and detection of network relay error frames. We now output the following error messages instead of posting "Device not responding" messages:
Modified the driver to handle the relay error frame when a fatal CPU error is present. The error messages were also updated to include "Main, Sub:" and "Net Addr, Node Addr:" in decimal notation: this should make it easier for users to compare to Device Property settings in the server project.

• Network relay error.[Net Addr, Node Addr: '0x00, 0x3A'], [End Code: '0x8302']

• Fatal CPU Unit error.[End Code: '0x0080']

• Non-fatal CPU Unit error.[End Code: '0x83C2']

5.3.118.0

2010/6/9

Fixed Address Hints for the C500 IR register.
Added 2 new string types:

• XXX as string with Only the Low Order byte (LSB - least significant 8-bits) of each word is used for

read/write. , Syntax: XXXaddr.lenE

• XXX as string with Only the High Order byte(MSB - most significant 8-bits) of each word is used for

read/write. , Syntax: XXXaddr.lenD

5.2.133.0

2010/2/18

Fixed thread synchronization issue which could result in intermittent stale communications for certain channels in multi-channel projects

5.1.71.0

2009/10/21

Fixed thread synchronization issue which could result in intermittent stale communications for certain channels in multi-channel projects

有关支持 Sysmac Way（Host Link 接口）的当前模型列表，请访问制造商网站。

特色套件

什么是驱动？

KEPServerEX 不仅是 OPC 服务器，它还是一种适用于工业自动化和 IoT 的连接平台。只需下载 KEPServerEX，然后从包含 150 多种设备驱动、客户端驱动和高级插件的 Kepware 库中选择，以便适合您工业控制系统的独特通信要求。

驱动是一种软件组件，能够使 KEPServerEX 满足某个特定设备、系统或其他数据源的连接要求。此驱动处理 KEPServerEX 与数据源进行的所有专属通信；客户端接口处理通向监控或控制设备的应用程序的所有连接，包括支持的 OPC 连接、专属连接和开放式标准连接。

驱动可以单独或以套件形式获得授权许可。随着连接需求的发展，可以按需对其他驱动进行许可。